Article List
- What are the types of lock nuts?Lock nut is a kind of nut widely used in machinery and other industries,and is also a very common one in industrial standard parts,the main use is to lock through the wire connector or other pipe fittings.The working principle of the locking nut is to self-lock by the friction between the nut and thBall Screw August 14, 2023
- What are the advantages of helical gear in the automotive and aircraft industry?Helical gear is one of the most common parts in the automotive and aircraft industry,most of which are used in transmissions and engines.The function of the helical gear is rich,can make the power to any direction conduction,can also change the speed and torque instantaneously,it can be said that ifBall Screw August 15, 2023
- How to maintain the slide linear module?When the linear module is not used for a long time,if it is not carefully maintained,it will cause a decrease in accuracy and speed,shorten the service life or other corrosion,rust and other failures. Routine maintenance includes the following aspects:1.Power on regularlyIn the plum rain season or iLinear Module August 16, 2023
- What are the characteristics of precision rack?Precision rack is a special gear distributed in the shape of the rack.The rack is also divided into straight rack and helical rack,which are paired with straight garden column gear and helical cylindrical gear respectively.The outline of the rack is direct,rather than gradual(flat for the tooth surfBall Screw August 16, 2023
- What are the basic structure and classification of linear bearings?●The basic structure of linear bearings(1) StandardThe shape surface of the standard linear bearing is a high-precision cylindrical surface, and has a high coaxiality with the linear bearing, which can be directly installed in the bearing, and is fixed at both ends with a stop ring or gland, which iLinear Module August 21, 2023
- What are the types and uses of shaft collars?The shaft collar is made of 45 steel,stainless steel,aluminum alloy and other materials, and is used with guide shaft, rotating shaft, circular pillar,installation base,etc.According to the connection method,the shaft collar can be divided into screw type, open mouth type,separation type and handleLinear Module August 24, 2023
- What are the characteristics of the linear guide clamp?A linear guide rail clamp,also known as a linear rail brake/linear guide lock/,is a brake element that directly clamps a linear rail or optical shaft.Pneumatic,hydraulic,manual,electric four control methods can be selected. The linear guide clamp refers to the product of directly clamping the guideLinear Guideway September 04, 2023
- What is the difference between ball linear guides and roller linear guides?· Linear ball guideLinear ball guide rail is composed of slide rail, slide block, ball, ball holder, ball returner and other assembly, the main principle is through the structure of the ball slot, ball returner to make the steel ball row for circular movement, so as to achieve the low friction lineaLinear Guideway September 07, 2023
- Installation procedure of magnetic grid ruler1.Clean the magnetic grid ruler mounting surface with alcohol;2.Install the reading head support and magnetic grid ruler installation toolPrecautions:①Ensure that the clearance between the magnetic grid ruler installation tool and the magnetic grid ruler installation surface is large enough to facilLinear Motor November 20, 2023
- What Are The Common Standard Shaft End Dimensions of Ball Screw?The ball screw nominal diameter is the outer diameter of the ball screw,and the common specifications are 12mm,14mm,16mm,20mm,25mm,32mm,40mm,50mm.The ball screw diameter and the load are basically proportional,and the larger the diameter,the larger the load.Ball screw has the characteristics of highBall Screw December 18, 2023