Article List

• Ball Screw Vs Lead Screw: How To Choose?

  Ball Screws and lead screws are not interchangeable in many cases considering accuracy, stiffness and load capacity.

  Ball Screw March 25, 2021
• What Are The Differences between Brass And Bronze Materials in Lead Screw Nuts?

  Brass lead screw nut is an alloy of copper and zinc,while bronze lead nut is an alloy composed primarily of copper,most often combined with tin,but sometimes with other metals.Brass lead screw nut is more malleable than zinc or copper.It has a low melting point(900 degrees Celsius)and flows during m

  Lead Screw April 26, 2023
• What is the cause of vibration of ball screw?

  In the process of assembly and commissioning,the vibration generated by the mechanical rotation movement is inevitable,the mechanical vibration will cause harm to the normal use of the machine tool,when abnormal vibration occurs,measures must be taken to ensure the operation of the machine.In additi

  Ball Screw November 19, 2023
• What's The Difference between Angular Contact And Deep Groove Bearings?

  1.Deep groove ball bearing:Deep groove bearing is the most common type of rolling bearing.Mainly bear radial load,but also can bear radial load and axial load.When it is only subjected to radial load,the contact angle is zero.When the deep groove ball bearing has a large radial clearance,it has the

  Linear Module November 17, 2023
• What are the advantages of synchronous belt linear module?

  ●Light weight and high rigidity: The belt drive linear module base made of aluminum alloy profiles is combined with the linear guide rail to achieve the two key characteristics of the touch group slide: light weight and high steel. Lightweight makes the device small and lightweight; High rigidity me

  Linear Module November 15, 2023
• What are the applications of linear guides in precision measuring equipment?

  1. Automatic coordinate measuring machineAutomatic coordinate measuring machine is a kind of high precision measuring equipment, which can be used for three-dimensional coordinate measurement,shape measurement and surface topography measurement.Because the automatic coordinate measuring machine need

  Linear Guideway November 14, 2023
• What should pay attention to when using Linear module vertically?

  The first thing to note is that the Z-axis vertical use of the linear module can drive the load is much smaller than the horizontal use, mainly when the vertical use of the inertia force and the weight of the workpiece itself will be concentrated on the vertical ball screw,at this time, the effect i

  Linear Module November 13, 2023
• When to use an anti-backlash nut lead screw?

  In the axis direction of the trapezoidal lead screw,the thread of the lead screw and the nut is a clearance match,and the clearance is the axial clearance.Refer to the figure above to fix the axial moving nut behind the lead screw and the distance that can be moved.The positioning accuracy of trapez

  Lead Screw November 07, 2023
• What Are The Advantages of The Ball Screw Motor Seat?

  The motor integrated seat is the motor drive seat, coupling,support seat,nut seat,ball screw into one.No need to match the fixed seat, screw, without too much adjustment,more convenient installation and better precision.The traditional connection method takes a lot of time to debug and re-debug the

  Linear Module November 07, 2023
• How to calibrate the accuracy of linear modules?

  The accuracy of the linear module generally refers to the repeated positioning accuracy and guiding accuracy, the repeated positioning accuracy is the accuracy of the linear module in the reciprocating motion 7 times the dial meter or laser interferometer detection,the linear module reaches positive

  Linear Module October 30, 2023