Article List

• What are the advantages of ACME lead screw with PTFE coating?

  1.Low coefficient of friction:In terms of friction coefficient,the PTFE coated lead screw has a static coefficient of 0.15,which helps to extend the life of the lead screw assembly and product.

  Lead Screw January 13, 2023
• Why are cages used in crossed roller guides?

  Cross roller guides are non-recirculating linear bearings,the rollers are oriented in a "criss-cross" mode(each roller rotates 90 degrees relative to the one next to it)and move between two parallel guides with V-shaped grooves.

  Ball Screw February 03, 2023
• What is the preload of the ball screw?

  Ball screw assemblies are delicate components.

  Ball Screw October 14, 2022
• What are ACME screws and Trapezoidal Screws?

  Lead screw refers only to a powered screw that relies on the sliding motion between the nut and the screw shaft.There are two variations of the lead screw:the screw with square thread and trapezoidal thread.

  Lead Screw February 02, 2023
• What is the PEEK material used in lead nut?

  PEEK(polyetheretherketone)is a high-performance engineering plastic with outstanding resistance to harsh chemicals,and excellent mechanical strength and dimensional stability.It offers hydrolysis resistance to steam,water,and sea water.PEEK has the ability to maintain stiffness at high temperatures and is suitable for continuous use at temperatures up to 338°F(170°C).

  Lead Screw December 21, 2022
• How to lubricate your ball screws?

  Correct lubrication is Vital to Ball Screw Life.

  Ball Screw July 02, 2021
• How are rack and pinion and Recirculating-ball used in car steering?

  When selecting ball screws,it is important to learn the application criteria that the components need to meet.There are several factors to consider,each of which plays a role in the decision-making process.

  Ball Screw February 01, 2023
• How to select ball screws?

  When selecting ball screws,it is important to learn the application criteria that the components need to meet.There are several factors to consider,each of which plays a role in the decision-making process.

  Ball Screw January 31, 2023
• What are the common applications of pinion and rack？

  A rack and pinion is a linear actuator that consists of a circular gear(pinion)engaged with a linear gear(the rack).A rack and pinion is used to convert rotational motion into linear motion.Pinion and rack drives can use both straight and helical gears.The drive pinion rotation results in a linear drive of the rack.A linear drive rack will cause the pinion to be driven and rotated.Rack and pinions are commonly used as follows:

  Lead Screw January 16, 2023
• What are the common applications of lead screw in medical imaging?

  How can lead screw backlash be reduced?

  Lead Screw November 12, 2022