Cautions About Use of Ball Screws
Publish Time: 2021-07-16 Origin: Site
Ball screw assemblies are delicate components.Therefore,extra care must be taken to prevent the ball track from damages that caused by edged component or tools.Meanwhile,the steel ball is very easily fall out of the nut or over stroke.Don't disassemble it.Otherwise,the ball screw will be damaged.
To prevent steel ball fall out of the nut through the disassembly of ball screw and nut or over stroke,please be careful while operating.If the steel ball falls out,please contact with ALM Linear Motion for further instruction.Do not attempt to reassemble,which might cause permanent damage to the ball screw.
If disassemble is required,please use a transfer pipe which has minor diameter than the screw.Diameter to transfer the nut to prevent falling out of the steel balls.
https://www.autolinearmotion.com/ball-screws.html