Home » Blog » Linear Module » How To Select Precision Cross Roller Bearing?

How To Select Precision Cross Roller Bearing?

Views: 3     Author: Site Editor     Publish Time: 2023-11-21      Origin: Site

Cross roller bearing is a common rotating support device in the mechanical industry,which is widely used in various equipment and mechanical systems.The correct selection of cross roller bearings is essential to ensure the performance,life and reliability of the equipment.The following is to determine the specific content of the selection:

cross roller bearing 9

Slewing Bearing Ring

Cross Roller Bearing 6

Slewing Ring Bearing Slewing Drive RB 2008 2508 3010 3510 4010 4510 5013 Precision Cross Roller bearing Rotary Table Bearing

● Determine the load type and size:

In the selection process,it is first necessary to determine the type and size of the load to be borne.Including radial load,axial load and torque load.Through the analysis of engineering requirements and equipment conditions,the load required to bear the bearing can be determined, so as to provide a basis for selection.

When determining the type and size of the load, it is necessary to carefully analyze the working conditions and forces of the equipment.Various load types(radial, axial, torque, etc.)are considered comprehensively,and the load value is calculated. This will help determine the bearing capacity and stiffness of the required bearing.

● Understand the working environment:

Cross roller bearings are different in different working conditions, their materials, sealing forms and lubrication methods are different. Therefore, the selection process needs to consider the temperature, humidity, pollutants and other factors of the working environment, and select the corresponding bearing materials and sealing forms to ensure its reliability and life.


● Consider speed and accuracy requirements:

Considering the operating speed and working accuracy requirements of the equipment is very important for selection. High-speed operation and high-precision equipment usually requires bearings with high stiffness and accuracy. According to the speed and accuracy requirements of the equipment, select the corresponding level of bearings, and ensure that it can meet the stability and accuracy of the equipment.

● Select the appropriate size and structure:

According to the determined load and working conditions, select the appropriate cross roller bearing size and structure. Choosing the right size and structure is a key step in the selection process. By referring to the selection manual and technical data provided by the manufacturer, the bearing parameters of different sizes and structures are compared and analyzed, and the parameters are compared and analyzed to select the appropriate bearings. This includes considerations such as inner diameter, outer diameter,width and structural type.


●Consider installation and maintenance:

In the selection process, it is also necessary to consider the installation and maintenance convenience of bearings. Reasonable selection of bearing structures and accessories to ensure that they are easy to install and maintain, in order to reduce the cost of maintenance and replacement, improve the reliability and production efficiency of equipment.

The above is the whole content of how to select cross-roller bearings. In the actual selection process, it is also necessary to consider the characteristics of equipment, engineering needs and actual operating experience. Therefore, it is recommended to fully communicate and exchange with suppliers and professionals during the selection process.



Crossed Roller Bearings from China, Crossed Roller Bearings Manufacturer & Supplier - ALM (autolinearmotion.com)




 No 1998 Jinfeng south road,Wuzhong district,Suzhou China.


Sign up to receive helpful Q&A, info on upcoming services and more.
Copyright © 2019. ALM Intelligent Technology(Suzhou) Co.,Limited All rights reserved.            Sitemap              Privacy Policy