Views: 0 Author: Site Editor Publish Time: 2026-10-20 Origin: Site
Ball screws are indispensable components in precision machinery. Do you know the causes of failure for ball screws?
Ball screws, also known as ball screws, are composed of a screw, a nut, steel balls, pre-pressing plates, reverseers and dust protectors. They are essential components in precision machinery and are also one of the most widely used components in the industrial sector. They are ideal products for converting linear motion to rotational motion.
The causes of failure for ball screws can be classified into three categories: excessive clearance, foreign objects entering the steel ball track, and fragmentation.
Among them, excessive clearance is mostly caused by improper installation. The reasons for excessive clearance include:
1. No pre-pressing or insufficient pre-pressing. For vertically placed ball screws, the nut will rotate and slide due to the influence of gravity. Ball screws without pre-pressing will have clearance.
2. Excessive torsional displacement.
3. Inappropriate selection or improper installation of bearings. If the shoulder of the screw is too long or too short, it may cause the bearing and the screw to not fit properly.
4. Insufficient rigidity of the nut seat or bearing seat or improper installation.
5. Surface parallelism or planarity of the support seat exceeds the tolerance.
6. Inappropriate combination of the motor and the ball screw.