Views: 0 Author: Site Editor Publish Time: 2026-11-11 Origin: Site
The greatest feature of gear-rack is that it can convert rotation and linear motion, and is particularly suitable for long strokes, heavy loads, and high rigidity.
· Almost unlimited stroke: The rack can be connected, ranging from several meters to several tens of meters, which is more suitable for long-distance transmission than ball screw.
· Large thrust and rigidity: There is no elastic deformation like that of belts, which is strong in bearing weight and resisting impact, suitable for machine tools, elevators, and stackers.
· High efficiency: Generally over 90%, with small power loss.
· Good positioning accuracy: When combined with high-precision racks and guides, it can achieve ±0.01–0.1mm, sufficient for most control equipment.
· Can transmit in both directions: Gear rotates, rack moves; rack pulls, gear can also rotate.
However, it also has a few drawbacks:
· Back clearance exists: There will be a gap when reversing, in precise applications, double gears for clearance elimination or pre-tightening are needed.
· Straight teeth are noisy: It is obvious at high speeds, and helical teeth are smoother but will generate axial force, requiring thrust bearings.
· High installation requirements: If the center distance and parallelism are not adjusted properly, it is prone to wear, sticking, or even tooth breakage.
So in a word: If you need long strokes, heavy loads, and high rigidity, it is very suitable to choose it; but if you need high precision, low noise, and smooth operation, more thought and effort should be put into design and assembly.
Contact us for more information!