Views: 1 Author: Site Editor Publish Time: 2023-09-04 Origin: Site
A linear guide rail clamp,also known as a linear rail brake/linear guide lock/,is a brake element that directly clamps a linear rail or optical shaft.Pneumatic,hydraulic,manual,electric four control methods can be selected. The linear guide clamp refers to the product of directly clamping the guide rail and linear shaft of the linear guide rail to brake or hold the position of the slide table.It solves the problem of insufficient rigidity when using motor + ball screw,cylinder and other general driving parts for position holding, and improves the performance of the device.
The characteristics of the linear guide clamp are as follows:
Prevent the deformation,shaking,vibration of the device,the rigidity of the motor,ball screw,cylinder and other driving parts does not affect,can obtain a high position to maintain rigidity,inhibit the deformation,shaking,vibration of the device.
Reduce the load of the drive class to prevent the load in the direction of the feed from being transferred to the drive class parts when the slide stop.
High retention, through the unique internal structure,so that the grease lubricated linear guide can also obtain great retention. Small and easy to load, it can be installed between 2 slides that are usually free space. It has no effect on the linear guide rail, and the clamping position avoids the rolling surface of the ball and roller.