Home » Products » Ball Screws » Custom Ball Screws » Trunnion Ballnut Ball Screw » Diameter 8mm Pitch 2mm ball screw 0802 for UAV

CATEGORY

loading

Share to:
sharethis sharing button

Diameter 8mm Pitch 2mm ball screw 0802 for UAV

0802 custom ball screw
Material:Gcr15 or 9cr18 or SUS440C
MOQ:1 set
Availability:
Quantity:
  • 0802

  • ALM

  • 8483401000

Diameter 8mm Pitch 2mm ball screw 0802 for UAV


Diameter 8mm Pitch 2mm ball screw 0802 for UAV


Miniature ball screw diameter

3mm~15mm

Lead and pitch 0.5mm~20mm
Accuracy grade C0~C7 
Manufacturing technology

both ground and rolled ball screw are available

MOQ

1 piece available for prototype

Delivery time

Samples 10~15 days, small order 20 days,bulk order 20~30 days.

Packing

Plastic bag + wooden box or according to customers' demands


Other models

0401, 0501, 0502, 0601, 0602, 0801, 0802, 0803, 0804, 0805 1001, 1002, 1003, 1004, 1201, 1202, 1203, 1204, 1205, 1210, 1402, 1403, 1404, 1405, 1602, 1603, 1604, 1605, 1608, 1610, 2002, 2003, 2004, 2005, 2006, 2010, 2020, 2502, 2503, 2504, 2505, 2510, 2512, 2525, 3205, 3206, 3208, 3210, 3212, 3216, 4005, 4008, 4010, 4012, 4016, 5005, 5010, 5012, 5016, 5020, 6310, 6312, 6316, 6320, 8010, 8016, 8020, etc

Mating parts

Nut housing,ball screw support BK,BF,EK,EF,FK,FF,end maching service is available



ALM miniature ball screw specification:


0501 ball screw


Notes:Above is part of standard ballnut dimensions,other model or nut type is available upon drawing



What is a ball screw?


Ball screw assembly is consisted of screw, nut and ball. The function is to transfer the rotary motion into linear motion or transfer the linear motion into rotary motion.This is further extension and development of slide ball screw. The important significance of development is as same as change of bearing from rolling motion to sliding motion. Because of excellent friction function, ball screw is widely used for all kinds of industrial equipments and precision instrument.



How a ball screw works?


Ball screw application


The advantages of ball screw vs. lead screw


1. High transfer efficiency

Balls with free motion in the ball screw assembly transfer the force and motion between screw and nut. This transfer mode replaces the traditional transfer mode that screw shaft and nut effect directly. Therefore the minimum rolling friction takes place of the sliding friction of traditional screw. The transfer efficiency of ball screw will reach more than 90%. The drive torque of transfer unit reduces to 1/3 of sliding screw. This also reduces the heat release largely.


2. High positioning accuracy
Ball screw has low heat release, small temperature increase and with actions of pre-stretch and eliminating axial clearance in the process, which make ball screw have high positioning accuracy and repeating positioning accuracy.


3. Reversibility
Ball screw has not sticky friction like sliding screw. It clears crawl which may exists during transfer. Ball screw can achieve two transfer modes - from rotary motion to linear motion and from linear motion to rotary motion, and transfer momentum.

4. Long service life
Since the strict control of ball screw groove shapes, surface hardness and material selection, the actual life of ball screw is much longer than sliding screw.

5. Good synchronization
Due to smooth running, axial clearance elimination and consistency in manufacture, several sets of ball screw assembly can drive the same unit or several identical parts to obtain the good synchronization.



Miniature Ball screw Application


ALM mini ball screws are used widely in the precision equipment or industrial machinery,defense industry, power tools, medical industry, passenger cars, wire harness cable processing, laser machine, 3D printer, custom automation equipment,linear servo actuator,3C Intelligent Manufacturing, new energy automobile etc.


Application


Shipping:


  1. Sample order:DHL, FedEx, UPS VIP account with discount.So you can get favorable shipping freight.


   2. Bulk order:ALM has negotiated professional shipping agent.Can ship the cargo by air or by sea depends on weight.



 Email or call us for a quote now!


workshop


ALM possesses factory occupying 8000 square meters with 120 employees.Among which,more than 30 professional technical engineers in lead screws,ball screws and the mating linear motion parts. 


All factory key manufacturing and testing equipments are imported from Japan, like CNC lathe, internal and external high-precision grinder, screw grinding machine, etc. ALM has passed the ISO9001:2015 and TS16949 Quality Management System. 


The R&D achievements over many years bring the company more than 25 national patents on lead screw and ball screw design.


Production technology


Quality testing


   OUR CUSTOMERS


ALM customers



  ALM MARKET


Market

Previous: 
Next: 

Technical support

content is empty!

COMPANY

CATEGORIES

CONTACT US

 +86-18962406535
 sales@autolinearmotion.com
 No 1998 Jinfeng south road,Wuzhong district,Suzhou China.

NEW SETTLER

Sign up to receive helpful Q&A, info on upcoming services and more.
Copyright © 2019. ALM Intelligent Technology(Suzhou) Co.,Limited All rights reserved.            Sitemap              Privacy Policy